Keeping Outlet Hot with Off Light Wire

How Do I Wire A Receptacle From A Light Outlet, But Keep It Hot When Light Is Off

Are you based in the zip code 02907, Cranston Providence, Rhode Island, and looking for a reliable electrician? Look no further than B&K Electric, a family-owned and operated electrical business that has been proudly serving the residents of Cranston, Warwick, and all of Rhode Island for over seventeen years. With a strong focus on community and customer service, B&K Electric specializes in electrical repair, panel maintenance, and installation, making them the go-to electrician for both residential and commercial properties in the Warwick area and the greater Providence area.

In this article, we will guide you through the step-by-step process of wiring a receptacle from a light outlet, while keeping it hot even when the light is turned off. This is a useful skill to have, as it allows you to have constant power supply to your electrical devices without depending on the light switch. So let’s get started.

Step 1: Gather Materials and Tools

Before beginning any electrical project, it is important to gather all the necessary materials and tools. You will need a receptacle outlet, a light switch, wire cutters, wire strippers, electrical tape, a screwdriver, and a voltage tester. Make sure that you have turned off the power supply to the area where you will be working. It is always better to be safe than sorry, so make sure to use caution while handling any electrical materials.

Step 2: Identify the Wires

The first step is to identify the wires at the light outlet. You will see a black, white, and bare copper wire. The black wire is the hot wire, the white wire is the neutral wire, and the bare copper wire is the ground wire. Use a voltage tester to ensure that the power is off. If the tester beeps, it means that the power is still on, and you should not proceed.

Step 3: Disconnect the Wires

Next, you will need to disconnect the wires from the light outlet. Using your screwdriver, unscrew the black and white wires, and then disconnect them from the light outlet. Make sure to tape the ends of the wires with electrical tape to avoid any accidents.

Step 4: Install the Receptacle Outlet

Now it’s time to install the receptacle outlet. Take the black wire that was connected to the light outlet and connect it to one of the brass screws on the receptacle outlet. Then take the white wire and connect it to one of the silver screws. Finally, take the bare copper wire and connect it to the green screw. Tighten all the screws securely.

Step 5: Connect the Light Switch

Now it’s time to connect the light switch. Take the remaining black wire and connect it to one of the brass screws on the light switch. Then, take a new black wire and connect it to the other brass screw. This new wire will provide power to the receptacle outlet. Finally, connect the white wire to the silver screw on the light switch. Again, make sure all screws are tightened securely.

Step 6: Test the Connections

Before turning the power back on, it is important to test the connections. Use the voltage tester to make sure that the wires are connected properly. If the tester doesn’t beep, it means that the connections are secure.

Step 7: Turn on the Power

Once you have completed all the connections and tested them, it’s time to turn the power back on. Use your light switch to turn on the light and check if the receptacle outlet is receiving power. If the light turns on and the outlet has power, congratulations, you have successfully wired a receptacle from a light outlet while keeping it hot when the light is off.

To conclude

Wiring a receptacle from a light outlet while keeping it hot when the light is off may seem like a daunting task, but with the right materials, tools, and steps, it can be done easily and safely. However, if you are not comfortable working with electricity, it’s always best to seek the help of a licensed electrician. Safety should always be your top priority when dealing with electrical projects.

So next time you need to have a constant power supply to your electrical devices, keep in mind these steps and refer back to this article for guidance. And if you ever need any electrical services, don’t hesitate to contact B&K Electric, your trusted electricians in Cranston and Warwick, Rhode Island.

Topics:

Wiring Receptacle,

Light Outlet,

Keep Hot