Upgrade your Home with Federal Pacific Panel

Federal Pacific Panel Replacement Cost

As a homeowner, you have a responsibility to ensure that your property is safe and up to code. One of the most important aspects of maintaining a safe and functional home is ensuring that the electrical system is up-to-date and reliable. One major factor in this is the condition of your electrical panel. While it may seem like a small and inconsequential part of your home, the electrical panel plays a crucial role in distributing electricity safely throughout your house. And when it comes to the safety of your family and your property, there’s no room for compromise.

If your home is more than 30 years old and you haven’t upgraded your electrical panel, chances are that you have a Federal Pacific Electric (FPE) panel. These panels were commonly used in homes from the 1950s to the 1980s and were known for their affordability. However, over time, it has become clear that these panels may pose a serious fire hazard and have been linked to a significant number of home fires and electrical accidents. If you own a property in the 02910 Cranston Providence zip code area, and your home was built during this timeframe, it’s essential to be aware of the risks associated with FPE panels and consider upgrading to a safer and modern electrical panel.

What is a Federal Pacific Panel?

Federal Pacific panels were popularly used in homes due to their low cost and availability. The company flourished in the years following World War II, as housing development boomed and there was a high demand for affordable electrical systems. However, as the years went by, it became evident that these panels did not meet the safety standards set by the industry. The panels were found to have faulty breakers that would fail to trip and shut off the flow of electricity in the event of an overload or short circuit. This issue could lead to overload, overheating, and potential electrical fires.

The Costs of Keeping an FPE Panel

The dangers associated with Federal Pacific panels are well-documented, and the Consumer Product Safety Commission has warned homeowners about the potential risks. Despite this, many homeowners still have FPE panels in their homes, either because they’re unaware of the dangers or because they haven’t prioritized upgrading their electrical system. In addition to the risk of household fires, there are other costs associated with keeping an FPE panel.

A major disadvantage of an FPE panel is its inability to handle modern electrical demands. With old wiring and outdated circuit breakers, it’s likely that your panel will be unable to handle the power needs of modern appliances and electronics. This can result in frequent tripping, flickering lights, and power outages, which can be not only inconvenient but also potentially damaging to electronics and appliances.

The Cost of Upgrading Your Electrical Panel

As a homeowner, the safety of your family and your property is priceless, and when it comes to electrical upgrades, investing in a safer and more reliable system is crucial. The cost of upgrading your electrical panel will depend on various factors, including the size and complexity of your home’s electrical system, the extent of work required, and your location. For a home located in the Cranston Providence area, the average cost of replacing an FPE panel is estimated to be between $1,500 and $3,000.

While this may seem like a significant investment, it’s essential to consider the benefits of upgrading to a modern and safer electrical panel. Not only will you have peace of mind knowing that your home is protected from the risks of fire and electrical accidents, but you’ll also have a more efficient and reliable electrical system that can meet the demands of your everyday life.

Choosing the Right Electrician

When it comes to upgrading your electrical panel, it’s crucial to hire an experienced and licensed electrician. The process of replacing an FPE panel involves extensive work, including updating wiring, installing new breakers, meters, and other components, and making necessary changes to ensure that your home is up to code.

In the Warwick, RI, area, there are several electricians to choose from, but one company stands out for their reputation, expertise, and commitment to customer service – B&K Electric. As a family-owned and operated business, B&K Electric has been serving the residents of Cranston, Warwick, and all of Rhode Island for over seventeen years. Their experienced team of electricians specializes in electrical panel maintenance, repairs, and upgrades, and they’re committed to ensuring the safety and satisfaction of their customers.

Conclusion:

As a homeowner, ensuring the safety of your family and your property should be a top priority. If your home is equipped with an FPE panel, it’s essential to take immediate action and upgrade to a modern and safer electrical panel. While there are costs associated with this upgrade, the long-term benefits and peace of mind are well worth the investment. Choose a reliable and experienced electrician like B&K Electric to handle the replacement, and you can rest assured that your home will have a safe and efficient electrical system for years to come.

Topics:

Federal Pacific panel replacement,

electrical panel upgrade,

licensed electrician