Installing Motion Sensor Lights Made Easy for Providence, RI Homeowners

Installing Motion Sensor Light

When it comes to the safety and security of our homes, there is no such thing as being too cautious. As a homeowner in the 02909 zip code of Providence, Rhode Island, you may have explored several options for increasing the safety of your home. One efficient and cost-effective way to do so is by installing motion sensor lights.

Motion sensor lights not only add an extra layer of security to your home but also provide convenience and energy efficiency. However, if you are not familiar with electrical work, installing motion sensor lights can be a daunting task. That’s where B&K Electric comes in. With over 17 years of experience, we are your go-to electricians for all your electrical needs in the Providence area and beyond.

At B&K Electric, we understand that installing motion sensor lights may seem like an intimidating task. That’s why we’re here to guide you through the installation process and help you make the right choices for your home. Let’s take a closer look at what you need to know before installing motion sensor lights and how B&K Electric can assist you.

Understanding Motion Sensor Lights

First and foremost, it’s important to understand what motion sensor lights are and how they work. These lights are equipped with a motion sensor that detects movement and turns on the light when someone or something passes by. The lights stay on for a predetermined amount of time before turning off again.

There are two types of motion sensors commonly used in motion sensor lights: passive infrared (PIR) sensors and microwave sensors. Each operates based on different principles, but both are effective in detecting motion. PIR sensors detect infrared light, while microwave sensors send out microwaves and measure their reflection. Depending on your specific needs and budget, you can choose the type of sensor that best suits your home.

Choosing the Right Location

Before installing motion sensor lights, it’s crucial to determine the right locations for them. These lights are most commonly installed near entrances, backyards, garages, and driveways. This helps deter potential intruders and also provides convenience for homeowners when arriving home at night.

Once you have determined the locations, keep in mind that the sensors’ range of detection can vary. Some sensors cover smaller areas while others can sense motion from a longer distance. It’s important to choose the right type of sensor and place it in a strategic location to ensure maximum coverage.

DIY vs. Professional Installation

While it may seem tempting to attempt a DIY installation to save some money, it’s always best to hire a licensed electrician for any electrical work. Not only will it save you time and energy, but it will also ensure the safety and efficiency of your motion sensor lights.

At B&K Electric, we have a team of experienced and knowledgeable electricians who are well-versed in installing motion sensor lights. We take all necessary safety precautions and ensure that the installation is done correctly to avoid any future problems or hazards.

Connecting the Lights to Power

After choosing the right location and determining whether to install the lights on your own or hire a professional, the next step is connecting the lights to a power source. This can be done in two ways: using an existing outdoor outlet or by hardwiring the lights to your home’s electrical system.

Using an existing outdoor outlet is a quick and simple solution. However, keep in mind that the outlet should be weatherproof and GFCI (ground fault circuit interrupter) protected. Hardwiring the lights to your home’s electrical system requires a little more work but provides a cleaner and more permanent solution. If you’re not familiar with electrical work, it’s best to leave this to the professionals.

Adjusting the Settings

Once the lights are installed and connected to power, it’s time to adjust the settings. Most motion sensor lights come with adjustable settings for sensitivity, time, and range. These settings will determine how the lights function, so it’s important to take the time to choose the right ones for your home.

For example, if the sensitivity is set too high, the lights may be triggered by small animals or even falling leaves, causing unnecessary lighting and draining energy. The time setting determines how long the lights stay on before turning off, and the range setting determines the distance from which the sensor can detect motion.

Maintenance and Troubleshooting

Proper maintenance of your motion sensor lights can ensure they function efficiently and last longer. Regularly check and clean the sensors to remove any buildup or dirt that may affect their performance. Also, keep an eye on the bulbs and replace them if they burn out.

In case you encounter any issues with your motion sensor lights, it’s important to troubleshoot and address them promptly. Common problems include the lights staying on continuously, not turning on at all, or only working sporadically. If you’re unable to resolve the issue on your own, don’t hesitate to reach out to a professional electrician.

Let B&K Electric Help You Install Motion Sensor Lights

At B&K Electric, we understand the importance of safety and security for your home and loved ones. That’s why we offer reliable and efficient electrical services, including installation of motion sensor lights, to residents in Providence, Rhode Island, and surrounding areas.

We are a family-owned and operated business, committed to providing excellent customer service and building long-lasting relationships with our clients. So, why wait? Contact us today to schedule a consultation and make your home a safer place with the installation of motion sensor lights.

Topics:

Motion Sensor Lights,

Home Safety,

Electrical Installation